Esta descrição vai estar muito vaga por agora pois tenho que fotografar o material e ter a certeza das referencias e irei actualizar entretanto
Subwoofer com caixa Hertz EBX 200 R- 75€
SIZE : 200mm (8") Reflex Sub Box
COMP: Single magnet high density fluz ferite, water-repellent pressed paper cone
DIMENSIONS: 476mm x 285mm x 276mm (BxLxH)
POWER HANDLING: 500W Peak Power, 250W Continuous Program Power
FREQUENCY RANGE: 30Hz - 400Hz
IMPEDANCE: 4 Ohm
http://img.photobucket.com/albums/v3...3052009009.jpg
http://img.photobucket.com/albums/v3...3052009011.jpg
Subwoofer com caixa homemade Magnat Supreme 3000(por forrar) - 75€
Amplificador Kenwood 400W KAC-6202- 50€
2-channel power amplifier with built-in variable LPF/HPF and Mofset switching power supply.
• MAX POWER 400W
• Variable LPF
• Variable HPF
http://img.photobucket.com/albums/v3...3052009006.jpg
http://img.photobucket.com/albums/v3...3052009007.jpg
http://img.photobucket.com/albums/v3...3052009008.jpg
Amplificador Alpine MRP-F240- 70€
The MRP-F240 is designed to work in a variety of applications: With 40 watts RMS per channel in 4-channel mode, you can easily drive two pairs of full-range or component speakers. Or, bridge the amp to 2-channel mode for 100 watts RMS x 2. That power makes your music sound tighter and more detailed at all volume levels.
* 40 watts RMS x 4 at 4 ohms
* 50 watts RMS x 4 at 2 ohms
* 100 watts RMS x 2 bridged output at 4 ohms
* 2-, 3-, or 4-channel output
* 4-ohm stable in bridged mode
* Tri-Way capable
* requires 10-gauge power and ground leads wiring and hardware not included with amplifier
* selectable high-pass/low-pass crossover at 80 Hz, 18 dB/octave (2 separate crossovers, one for channels 1 & 2, another for channels 3 & 4)
* subsonic filter at 15 Hz for channels 3 & 4
* tuned Bass EQ (0-12 dB bass boost at 50 Hz) for channels 3 & 4
* preamp outputs
* MOSFET power supply
* STAR Topology (minimizes internal noise and prevents ground interference)
* speaker- and preamp-level inputs
* gold-plated screw terminals
* 10-1/2"W x 2-7/16"H x 9-9/16"D
http://img.photobucket.com/albums/v3...3052009014.jpg
http://img.photobucket.com/albums/v3...3052009016.jpg
http://img.photobucket.com/albums/v3...3052009017.jpg
Autorádio Kenwood CD/MP3 (sem o cabo ISO para ligar às fichas ISO do carro)- 75€
http://img.photobucket.com/albums/v3...3052009012.jpg
http://img.photobucket.com/albums/v3...3052009013.jpg
Amplificador Lightning Bolt B2.300.4 - Este amplificador parece que queima subs, vinha com um carro e nunca o liguei, se alguem perceber de electronica ou o quiser testar por sua conta e risco vendo barato - 20€
Built by Rockford Fosgate
Amplifier Type: Multi Channel
Amplifier Output: 4-channel
Input Channel Qty: 4
Output Channel Qty: 2
Power
RMS Power: 50 Watts x 4
Output Details: 75 Watt - 2 Ohm - 4 channel(s), 150 Watt - 4 Ohm - 2 channel(s)
Output Power: 900 Watt
Features
Colors: Yellow, Chrome
High Pass Frequencies: 40 - 400 Hz
Low Pass Frequencies: 40 - 400 Hz
Bass Boost Gain: 0 to +12dB
High Level Inputs: Yes
http://img.photobucket.com/albums/v3...T/03052009.jpg
http://img.photobucket.com/albums/v3...3052009001.jpg
http://img.photobucket.com/albums/v3...3052009002.jpg
Amplificador Crunch USA 200W DS-504 - 25€
Audio power output per Channel, both channels driven at 14,4VDC
-4 Ohms, THD 0.1% 50W x 4
-2 Ohms, THD 10% 74W x 4
-Signal to Noise Ratio >90dB
-Frequency Response 20 - 30KHz
-Crossover: Separate
-High Pass 80Hz - 1.2KHz(CH1/2)
-Low Pass 40Hz - 150Hz(CH3/4)
-Slope 12dB Octave
-Bass Boost 0 - 12 dB
-Input Sensitivity 200mV - 4.0V
-Low lwvwl Input Impedance 47kohm
-Damping Factor 180 into 4Ohm
-Channel Separation >70dB
-Fuse Rating 15A
http://img.photobucket.com/albums/v3...3052009003.jpg
http://img.photobucket.com/albums/v3...3052009005.jpg
http://img.photobucket.com/albums/v3...3052009004.jpg
Material que tenho a mais, não tenho facturas mas não é nada roubado está mesmo só a ocupar espaço.
Aceito trocas por por iphone 3G ou outras coisas no entanto prefiro a venda.
Zona de Almada/Corroios
